JeF4y Racing - CBR600F4 Message Forum

Welcome, Guest. Please login or register.
May 18, 2012, 11:14:49 AM

News:

cbr600f4 Discussion Forum
Main Forum
General discussion
factory stickers « previous next »

Pages: 1 [2]

Author Topic: factory stickers (Read 3670 times)

F4Ridin
Full Member

Offline Offline

Posts: 135

Ummm...nothing creative to write at the moment

Re:factory stickers
« Reply #15 on: May 14, 2002, 04:44:59 AM »

If your able to just get parts of tehm, I would defiantely be interested in just the large F4 pieces. Let me know. Thanks.

Logged

CBR600F4: Red/Balck
Two-Brothers Carbon Fiber(CF) Slip-on, CF Flush mounts (front), CF Short-Stalk(rear), CF Frames Sliders, Sprocket Specialist Front (-1) Rear (+1), RK-SHO 520 Chain, Dunlop 207's, CF Tank Protector, CF Gas Cap Cover, ProGrips, LP Footpegs, Aluminum Vent Screens, caps and such

CocaColaKid
Paul
Sr. Member

Offline Offline

Posts: 388

Ya, ok what ever!

Re:factory stickers
« Reply #16 on: May 14, 2002, 01:18:11 PM »

Well the paypal thing can be arranged pretty easily. And yeah I can cut out and part of the decals just need the colour yous want them in.

Logged

Only the real thing will do...

CbRF4rydeR
Newbie

Offline Offline

Posts: 30

huh?

Re:factory stickers
« Reply #17 on: May 14, 2002, 05:59:47 PM »

Cool! I would need them in silver just like the pic you posted, and how much for the left and right wings, and all the little pieces that go on the tank? How much for the whole kit shipped to San Diego? Thanks again! Grin

Logged

CocaColaKid
Paul
Sr. Member

Offline Offline

Posts: 388

Ya, ok what ever!

Re:factory stickers
« Reply #18 on: May 15, 2002, 01:10:21 PM »

I just cut the a bunch of the decals last night so hopefully I will be able to check them over tonight after work to make sure they are an exact fit. As for shipping to San Diego I need to know where exactly in San Diego they would be going to get the shipping rate. Right off the top of my head I think you would be looking somewhere around $75-$100 CDN / $46 - $62 USD for the whole set of stickers.

Logged

Only the real thing will do...

CbRF4rydeR
Newbie

Offline Offline

Posts: 30

huh?

Re:factory stickers
« Reply #19 on: May 15, 2002, 06:47:41 PM »

WOW! Good Deal! The zip code in San Diego I would need these bad boys shipped is 92114. I'll email you my complete shipping info to give you and me an idea of what the total price with shipping will be. Thanks again!

Logged

CocaColaKid
Paul
Sr. Member

Offline Offline

Posts: 388

Ya, ok what ever!

Re:factory stickers
« Reply #20 on: May 16, 2002, 03:21:51 AM »

Just had some shit luck. I can make almost all the stickers except the little honda one on the tail section. I need to use the thermal printer which broke down today. I can make everything else though for right now. I'm hoping the printer can be repaired and back in operation within the next week.

Also, just tried installing a test set of graphics on the bike and I must say, damn things fit pretty good. Almost identical to the factory one, but a lot cheaper I would imagine. The wife however made a really good observation though, I missed creating the upper one on the side panels. I will have that one created either tomorrow or I'll do it on the weekend, either way it not really a big deal.

As for price, it looks like FedEx is about the best at $10.12 for a box 36l x 6w x 6h. Price should be around $66 USD give or take a buck or two.

Logged

Only the real thing will do...

CbRF4rydeR
Newbie

Offline Offline

Posts: 30

huh?

Re:factory stickers
« Reply #21 on: May 16, 2002, 04:24:42 AM »

That sounds great! I got your email Paul, thanks for the prompt replies back. I'll shoot you an email next Friday, so hopefully you'll have them done then.

Logged

joetassone
Sr. Member

Offline Offline

Posts: 292

Re:factory stickers
« Reply #22 on: May 17, 2002, 01:47:43 AM »

Hey CCKid,

Could you get me price on just the CBR (located by the ram air ducts) the large Honda (mounts on the lower). Shoot me an email at jtassf4@hotmail.com

thanks

Logged

Is there any greater optimist than a racer on the starting line?
-Phil Hill

CocaColaKid
Paul
Sr. Member

Offline Offline

Posts: 388

Ya, ok what ever!

Re:factory stickers
« Reply #23 on: May 17, 2002, 03:35:05 AM »

Well after looking at this upper decal I've come to a conclusion, it's not going to be an easy on to create. Note to anyone wishing to install these babies will need to use a heat gun in order to form this one into the dips. It pulls down nicely once you use a bit of heat to help mold the vinyl. Actually a hair dryer would probably work also but I think it would be too much air be pumped out.

Logged

Only the real thing will do...

hondatech
Justin
Administrator
Sr. Member

Offline Offline

Posts: 428

Jeffy sent me!

Re:factory stickers
« Reply #24 on: May 19, 2002, 03:57:40 AM »

Hey, kid, could you do this:
http://www.tapeworks.com/Pages/1108.html#anchor1031616
?
How much? I'd rather give the money to a real person than some company. It would be those same graphics, only on a black bike, so the red would stay red, but the black would be white, get it?

Logged

Justin
97 900RR
93/97 F3 Frankenbike
83 RZ 350
90 VTR 250
"Under certain circumstances, profanity provides a relief denied even to prayer" -Twain

Pages: 1 [2]

« previous next »

Jump to:

Login with username, password and session length

Powered by SMF 1.1 RC3 | SMF © 2001-2006, Lewis Media

Page created in 0.047 seconds with 15 queries.